No Category

AC Spindle Drive – OKUMA VACII D-8A

The VACII D-8A is an AC spindle drive amplifier (“AC Spindle Drive”) manufactured by OKUMA, belonging to the VAC II series of AC spindle drive units. The module is designed to operate within OKUMA CNC systems fitted with the proprietary OSP (OKUMA Servo Pack) controller, typically installed in OKUMA machining centres and CNC lathes produced during the 1980s–1990s. The designation “D-8A” identifies the power/current variant within the VAC II family; it governs AC spindle motor torque and speed, interfacing directly with the OSP controller module.

The spindle drive is the power electronics module that converts three-phase AC mains voltage into variable voltage and frequency for the spindle motor, closing the speed and torque loop based on CNC reference commands. Without it the spindle cannot be speed-controlled or smoothly accelerated and decelerated: any failure causes an immediate machine stop and makes further machining impossible.

OKUMA Corporation is one of Japan’s leading CNC machine tool manufacturers, founded in 1898 and headquartered in Oguchi, Aichi, Japan. It is one of the few manufacturers worldwide to design and integrate the machine, motor, drive and CNC control in-house through the proprietary OSP system. Products in the VAC II series are legacy / discontinued: available exclusively as used spare parts, surplus stock, or through specialist repair services.

Main Technical Specifications

Servo Drive Unit – OKUMA MIV22-3-V5

The MIV22-3-V5 is an intelligent vector servo drive (“Motor Intelligent Vector Drive”) manufactured by OKUMA, belonging to the MIV (Motor Intelligent Vector) series. It is designed for use in OKUMA CNC machining centres and lathes equipped with the proprietary OSP (Open System Platform) control system. It handles vector speed and torque regulation of the axis servo motor, receiving digital set-point references from the CNC and driving the power stage accordingly. The designation “MIV22” indicates the rated current class (~22 A); the suffix “3” identifies the variant or number of controlled axes, while “V5” denotes the firmware/hardware revision.

The servo drive is the electronic heart of the axis motion system: it converts the digital references from the OSP control into current supplied to the servo motor, ensuring precise positioning and dimensional repeatability in the machined part. If it fails, the controlled axis loses all ability to move in a controlled manner, rendering the machine unusable and halting production.

OKUMA Corporation, founded in 1898 in Nagoya, Japan, is one of the world’s leading CNC machine tool builders. It is one of the few manufacturers to develop in-house the machine, the numerical control (OSP – Open System Platform), and the motors and drives, ensuring full system integration. Components of the MIV series in older versions are legacy / discontinued and primarily available as refurbished used parts or through specialist repair services.

Main Technical Specifications

Axis CNC Servo Drive – OKUMA MIV45-3-V5

The MIV45-3-V5 is a digital CNC axis servo drive (“Axis Servo Drive”) manufactured by OKUMA Corporation, a component of the axis control architecture in OKUMA CNC machining centres and lathes equipped with the proprietary OSP (Open System Platform) numerical control. The unit receives position and speed references from the NC board via OKUMA’s proprietary serial bus and digitally manages the current, speed, and torque loops of the AC servo motors driving the machine axes. The suffix V5 identifies the hardware/firmware revision within the MIV45 series; the number 3 denotes the axis configuration variant of the unit.

The servo drive is the component that converts digital commands from the CNC into phase currents for the machine axis AC motors, closing the position, speed, and torque control loops in real time. A failure immediately triggers an axis alarm and halts machining; an uncontained following error can cause collisions or dimensional rejects, making this drive critical for both process safety and part quality.

OKUMA Corporation is one of the world’s leading CNC machine tool manufacturers, founded in 1898 in Oguchi, Aichi, Japan. It is the only builder that designs and manufactures machines, motors, drives, and the numerical control system (OSP) entirely in-house, ensuring full vertical integration. Components in the MIV series belong to OSP control generations that are now in an advanced stage of their life cycle: availability as new spare parts is very limited, and specialist repair or authorised OKUMA distributors are strongly recommended.

Main Technical Specifications

CNC Power Supply – OKUMA MPS 20

The MPS 20 is a panel-mount CNC control power supply (“Main Power Supply”) manufactured by OKUMA, used as the power supply unit in OSP (Open System Platform) numerical control systems fitted to OKUMA machine tools. The module converts mains voltage into regulated DC voltages (+5 V, ±15 V, +24 V DC typical) required by the CPU boards, I/O modules and drive electronics of the control. Documented on machining centres and CNC lathes of the LB, LR, MA, MB series and OSP3000 / OSP5000 control systems.

The MPS 20 power supply is the backbone of the CNC control system’s energy supply: without stable, filtered voltages all logic boards, servo modules and the operator panel cease to function immediately. A power supply failure results in complete machine downtime and, in the most serious cases, loss of position data with the risk of mechanical interference on restart.

OKUMA is a Japanese manufacturer founded in 1898 and one of the world’s leading producers of CNC machine tools and proprietary OSP control systems. The exclusive integration between machine and control ensures optimal performance but makes spare parts dependent on the OKUMA supply channel. Components in the MPS series for first- and second-generation OSP systems are legacy / discontinued: available only as used, surplus or through specialist repair.

Main Technical Specifications

Servo Axis Drive Module – OKUMA MIV30-3-V5

The MIV30-3-V5 (catalogue code MIV303V5) is a servo axis drive module (“Servo Axis Drive Module”) manufactured by OKUMA, designed for OKUMA CNC machining centres and lathes equipped with the OSP control system (Open System Platform). The module closes the speed and current regulation loops for the axis servo motors, receiving references from the CNC control unit via the proprietary internal communication bus and generating the three-phase PWM-modulated output to the servo motor. The MIV designation identifies servo drive modules within the OKUMA drive family; the “30” suffix typically indicates the peak current rating (approximately 30 A), while “V5” identifies the hardware and firmware variant/revision.

The servo axis drive module is the power electronics component that converts digital commands from the CNC into precisely modulated electrical power to drive the axis servo motor. It ensures accurate position, speed and torque control on each controlled axis. In the event of failure, the axis can no longer be controlled: the machine triggers an immediate alarm with motion lockout and no machining operation is possible until the module is replaced or repaired.

OKUMA is one of Japan’s leading CNC machine tool manufacturers, founded in 1898 in Nagoya, Japan. Unlike most competitors, OKUMA designs and manufactures both the machine tools and the CNC control systems (OSP series) in-house, ensuring full integration between mechanics and electronics. MIV-series modules intended for earlier-generation OSP controls are legacy / discontinued: availability is limited to used parts, NOS/surplus stock, or specialist repair services.

Main Technical Specifications

Servo Drive Module – OKUMA MIV08-1-B5

The MIV08-1-B5 is a servo drive module (“Servo Drive Module”) manufactured by OKUMA Corporation, a component of the axis control system for OKUMA CNC machine tools equipped with the proprietary OSP (Open System Platform) numerical control. The module manages speed, torque, and position regulation for a servo axis, interfacing with the CNC via the OKUMA proprietary serial bus. The alternate part number MIV081B5 identifies the same component in the OKUMA spare parts catalogue. The component may exist in multiple hardware revisions.

The servo drive module is the core of the axis control loop for the machine’s linear or rotary axes: it converts digital commands from the CNC into motor supply current, closing the position, speed, and torque loops in real time. A failure of this module causes immediate locking of the affected axis and halts the machining cycle, rendering the machine inoperable until the component is replaced or repaired, with consequent production downtime.

OKUMA Corporation is one of Japan’s leading CNC machine tool builders, founded in 1898 in Nagoya. It is distinguished by its vertically integrated design of machines, CNC controls (OSP series), and drives — all developed and manufactured in-house. Components in the MIV series are legacy / discontinued: available only as used/surplus or through specialist repair services.

Main Technical Specifications

Servo Drive Module – OKUMA MIV0101-1-B1

The MIV0101-1-B1 is a servo drive module (“Servo Drive Unit”) manufactured by OKUMA, a component of the axis control system for OKUMA CNC machine tools equipped with the OSP (Open System Platform) controller. The module manages speed, torque, and position regulation of a brushless servo motor, receiving commands from the CNC via a proprietary bus and returning position/speed feedback via a dedicated encoder. The part number MIV0101-1-B1 identifies hardware revision B1 of the MIV0101 family; other hardware revision variants may exist.

The servo drive module is the power and control element that converts CNC digital references into phase currents for the axis motor: it closes the position, speed, and current loops, ensuring the positioning accuracy typical of OKUMA machine tools. A module failure triggers the corresponding axis alarm, disables axis movement, and immediately stops the machine, preventing production from resuming until the unit is replaced or repaired.

OKUMA Corporation is a Japanese manufacturer founded in 1898 in Nagoya, specialising in CNC machine tools (lathes, machining centres, grinding machines) and the in-house OSP (Open System Platform) control systems developed entirely internally. It is one of the few manufacturers in the world that designs the machine tool, the CNC controller, and the drives entirely in-house. Products of the MIV series are legacy / discontinued: available exclusively as used, surplus, or through specialist repair services.

Main Technical Specifications

AC Servo Drive – OKUMA MIV08A-1-B5

The MIV08A-1-B5 is a digital AC servo amplifier (“AC Servo Drive”) manufactured by OKUMA, belonging to the MIV series of axis servo amplifiers. The unit is designed to operate within OKUMA CNC systems equipped with OSP (Open System Platform) controllers, covering the OSP5000, OSP7000, and OSP-U generations. It is documented on OKUMA machining centres and CNC lathes of the LB, MB, and MC series. The designation “08A” indicates a nominal output current of approximately 8 A; the suffix “B5” identifies the hardware variant and revision of the module.

The servo drive closes the position, speed, and torque control loops of a linear or rotary machine axis: it receives digital commands from the OKUMA CNC via the proprietary serial bus and generates the three-phase current required to power the servo motor, ensuring fast and repeatable positioning. A drive failure immediately stops the affected axis with a CNC alarm, rendering the machine inoperable; in severe cases it may result in position loss or an axis crash.

OKUMA Corporation, founded in 1898 in Oguchi, Japan, is one of the world’s leading manufacturers of CNC machine tools and control systems. OKUMA develops its machine tools, OSP controllers, and servo components entirely in-house, ensuring full hardware and software integration. Products in the MIV series are legacy components of the OSP system and are legacy / discontinued: available only as used stock, surplus, or through specialist repair services.

Main Technical Specifications

Drive Inverter Module – OKUMA MIV08-3-V1

The MIV08-3-V1 is an electronic drive inverter module (“Drive Inverter Module”) manufactured by OKUMA, documented as a component of the servo and spindle drive systems for OKUMA CNC machine tools equipped with OSP (Open System Platform) controllers. The module performs DC-to-AC power conversion and current/speed regulation for servo axes or spindle motors, operating within OKUMA’s integrated proprietary drive architecture. The MIV designation identifies inverter modules within the OKUMA drive family; the suffix 08 denotes the current/power size variant, 3 the sub-variant, and V1 the hardware revision.

The MIV08-3-V1 inverter module is the core power electronics component that converts DC bus voltage into variable-frequency, variable-voltage AC power for the connected servo or spindle motor, closing the current and speed loops under command from the OSP controller. In the event of failure, the axis or spindle managed by this module becomes completely inoperative and the machine cannot carry out any machining operations; the proprietary and integrated nature of the OKUMA system makes this component critical and non-interchangeable with generic equivalents.

OKUMA Corporation, founded in Nagoya (Japan) in 1898, is one of the world’s leading manufacturers of CNC machine tools and integrated control systems. The company develops its own controllers (OSP), drives, and motors as a closed proprietary system, making spare parts in this series exclusive and non-interchangeable with other brands. Modules in the earlier-generation MIV family are legacy / discontinued: available only as used, surplus, or through specialist repair services.

Main Technical Specifications

AC Servo Drive – OKUMA MIV0404A-1-B5

The MIV0404A-1-B5 is an AC vector servo drive (“AC Servo Drive”) manufactured by OKUMA Corporation, belonging to the MIV series (Motor Interface Vector) used in OKUMA CNC systems with the proprietary OSP control (Open System Platform). The unit converts digital CNC commands into current and voltage signals for the AC brushless motor of the controlled axis, managing the current and speed loops in vector mode. The part number MIV0404A-1-B5 identifies the MIV series, current class 04 A, hardware revision A-1 and mechanical/firmware variant B5.

The servo drive is the power and regulation module that translates position and speed references generated by the OSP control into variable current for the axis motor: it closes the current and speed loops ensuring precise and repeatable motion during machining. A drive failure renders the controlled axis completely inoperative, immediately stopping the machine; as a proprietary OKUMA electronic component, availability as new is nil and sourcing relies exclusively on the surplus market and specialist repair.

OKUMA Corporation is a Japanese machine tool builder founded in 1898 in Nagoya, a pioneer of vertical integration in the CNC sector through the in-house production of machines, controls and drives. The proprietary OSP control and the associated MIV-series drives are legacy / discontinued: no longer available as new through official OKUMA channels, sourced exclusively as used surplus stock or through specialist repair providers.

Main Technical Specifications

Servo Drive Module – OKUMA MIV02-1-B1

The MIV02-1-B1 is a servo drive module (“Servo Drive Module”) manufactured by OKUMA, belonging to the MIV series (Motor Inverter Vector) of the integrated drive system for OKUMA machining centres and CNC lathes equipped with the OSP (Open System Platform) control. The module manages the current and speed regulation loops for linear or rotary axis drives, interfacing with the axis control board and the drive power stage on a proprietary rack. The designation MIV02-1-B1 identifies size class 02 (small to medium power rating), hardware revision B, issue 1.

The servo drive module is the core of the machine’s axis motion control: it receives position and speed references from the CNC and closes the regulation loops on the motor, ensuring geometric accuracy on each axis during machining. A failure of this module causes the immediate stop of the corresponding axis and makes it impossible to execute any machining cycle; in severe cases it may result in uncontrolled axis movement with risk of mechanical collision.

OKUMA is one of the world’s leading CNC machine tool builders, founded in Japan in 1898. The company is notable for its complete vertical integration: it designs and manufactures its CNC control (OSP – Open System Platform), drives and motors entirely in-house, ensuring long-term compatibility and support. Components in the MIV series belong to an older control generation and are legacy / discontinued: sourcing is possible only as used, surplus, or through specialist repair.

Main Technical Specifications

Servo Axis Drive Module – OKUMA MIV0204A-1-B5

The MIV0204A-1-B5 is a servo axis amplifier module (“Servo Amplifier Module”) manufactured by OKUMA Corporation, forming part of the axis control chain in OKUMA machining centres and lathes equipped with the OSP (Open System Platform) CNC control. The module handles speed and torque regulation of the servo axis motor, interfacing with the CNC unit via the proprietary OKUMA serial bus and with the drive power stage. The MIV designation identifies the OKUMA servo amplifier family; the suffix A-1-B5 specifies the power and hardware configuration variant. This is not a CPU module or spindle drive, but a dedicated amplifier for a single machine axis.

The servo axis drive is the electronic module that converts position and speed commands from the CNC into drive current for the axis motor: it closes the speed and torque loop, ensuring positioning accuracy and dynamic stiffness during machining. In the event of failure the module triggers an alarm that immediately stops the controlled axis — and often the entire machine — making any cutting operation impossible until the drive is replaced or repaired.

OKUMA Corporation is a Japanese machine tool manufacturer founded in 1898, headquartered in Oguchi, Aichi, Japan. It is one of the few manufacturers worldwide to integrate machine tool, CNC control (OSP series) and servo drives entirely in-house, guaranteeing full system compatibility. Products in the MIV family are legacy / discontinued: no longer available new through the official OKUMA network and sourced exclusively as used, surplus or via specialist repair.

Main Technical Specifications