Products

I/O Interface Control Board – OKUMA ICB1 1006-2101

The 1006-2101 is an electronic I/O interface and control board (“Interface Control Board 1”), designated ICB1, manufactured by OKUMA. The component belongs to the board family of the OKUMA OSP (Open System Platform) CNC controller and is documented as the interface module between the machine tool’s control subsystems: it manages the flow of digital I/O signals between the main CPU, the operator panel, the axis drives, and the integrated PLC subsystem. Available as the ICB1 variant; the factory part number may also appear in the alternative format listed in the table.

The ICB1 board acts as the central communication hub within the OKUMA control architecture: it routes and conditions digital signals between the CNC rack modules, ensuring real-time consistency of machine states (enables, alarms, interlocks). A failure of this component compromises all inter-module communication: the machine becomes unable to accept commands or monitor axis and auxiliary states, causing an immediate machine stop that cannot be recovered without board replacement or specialist repair.

OKUMA Corporation is a Japanese CNC machine tool manufacturer founded in 1898, headquartered in Nagoya (Aichi Prefecture). A vertically integrated company, OKUMA designs and manufactures both the machine tools and the CNC control systems (OSP – Open System Platform) in-house — a rare distinction in the industry. Products from the older OSP generations are legacy / discontinued: availability is limited to used, surplus and specialist repair.

Main Technical Specifications

Interpolation Control Board ICB1 – OKUMA 1006-2100

The 1006-2100 is an interpolation control board ICB1 (“Interpolation Control Board 1”) by OKUMA Corporation, a component of the OKUMA OSP (Open System Platform) CNC control system, documented on OSP-5000L and OSP-7000L series controllers. The board handles real-time interpolation calculations required for multi-axis motion coordination, interfacing with the main CPU board and the axis control boards within the OSP rack. The part number 1006-2100 uniquely identifies this PCB revision; the designation ICB1 indicates its primary slot position in the control rack.

The ICB1 board is the computational core of CNC interpolation: it processes NC program blocks in real time and calculates velocity ramps and coordinated trajectories for all controlled axes. Without it, the control system cannot execute any interpolated movement, rendering the machine completely unusable for machining. A failure on this board typically manifests as system errors, axis lockout, or inability to start the automatic cycle.

OKUMA Corporation is one of Japan’s leading CNC machine tool manufacturers, founded in 1898 in Nagoya. The company is the world’s only manufacturer that designs both its machines and its own CNC controls (the OSP series) entirely in-house, ensuring fully proprietary hardware/software integration. Components of the OSP-5000/7000 series are legacy / discontinued: spare parts are available only as used, NOS from residual stock, or through specialist repair.

Main Technical Specifications

CNC Control Circuit Board – OKUMA 1006-1102

The 1006-1102 is an electronic CNC control board (“CNC Control Circuit Board”) manufactured by OKUMA, the Japanese builder of machine tools and proprietary CNC systems. The part number falls within the standard electronic spare-parts nomenclature of OKUMA’s OSP (Open System Platform) control series, fitted on machining centres, CNC lathes, and turn-mill centres. The board handles processing, signal acquisition, or internal interface functions within the machine’s electrical cabinet. No specific revisions or included accessories have been documented beyond the board itself.

The electronic boards of the OSP series form the logical core of the OKUMA CNC system: each board is responsible for a specific function — axis processing, I/O, communication, or power — and failure of even a single board can render the machine completely inoperable. Timely replacement is critical to minimising downtime, as lead times for genuine OKUMA spare parts can be lengthy and costs high.

OKUMA Corporation is a Japanese manufacturer founded in 1898 in Nagoya, specialising in CNC machine tools and their own proprietary OSP control systems. Unlike many competitors, OKUMA designs and manufactures both machines and controls in-house, ensuring exclusive hardware/software integration. Electronic components from the older OSP series (OSP 5000, OSP 7000) are legacy / discontinued and available almost exclusively on the used market or through specialist repair services.

Main Technical Specifications

Servo Velocity Control Board SVC II – OKUMA 1006-0601 (2CH)

The 1006-0601 (2CH) is an electronic servo velocity control board (SVC II – “Servo Velocity Control II”) manufactured by OKUMA, documented as a component of the proprietary OSP (Open System Platform) CNC systems installed on OKUMA machining centres and lathes. The board implements the digital velocity controller for the machine’s servo axes, receiving velocity references from the CNC main CPU and closing the feedback loop via encoder or resolver signals mounted on the motors. Available in a dual-channel (2CH) variant, it is capable of managing two independent servo axes simultaneously on the same control backplane.

The SVC II board is the digital controller that closes the velocity loop on the machine’s servo axes: it interprets the velocity command issued by the OSP CNC CPU and generates the current reference to the drive power stage, keeping motor rotation stable and precise even under load variations. In case of failure, the control system loses velocity feedback on the affected axes, rendering the machine inoperable and triggering axis or drive alarms on the CNC panel.

OKUMA Corporation is a Japanese machine tool manufacturer founded in 1898 in Nagoya, among the world leaders in machining centres, lathes and grinding systems. A hallmark of OKUMA is complete vertical integration: machines, CNC controls (OSP – Open System Platform), drives and motors are all designed and manufactured in-house. The SVC II board belongs to the OSP5000/OSP7000 generations of the 1980s–90s and is legacy / discontinued: available only as used spare, surplus stock or through specialist repair.

Main Technical Specifications

SVC II Servo Control Board – OKUMA 1006-0600 (1CH)

The 1006-0600 (1CH) is an electronic servo control board (“Servo Velocity Control Board – SVC II”) manufactured by OKUMA, documented as a component of the OSP (Open System Platform) series CNC machining centres and lathes. The board manages a single axis drive channel (1CH), closing the speed and current regulation loops on the servo motor of the corresponding axis and interfacing with the CNC axis control unit. The “II” suffix denotes the second generation of the SVC family; the single-channel variant is identified by the 1CH suffix in the commercial part number.

The SVC II board is the electronic controller that governs axis servo motor speed and torque: it receives the speed reference from the CNC controller and maintains the programmed position and velocity during interpolated motion. A failure of this module causes loss of control on the affected axis, with immediate program halt, an axis alarm, and inability to perform any machining until the board is replaced or repaired.

OKUMA Corporation is a historic Japanese CNC machine tool manufacturer, founded in 1898 in Oguchi (Aichi Prefecture). It is one of the few manufacturers worldwide to integrate the design and production of the machine, CNC control (OSP series), motors and drives within a single company. Products in the SVC II family belong to dated OSP systems and are legacy / discontinued: available only as used or surplus stock, or through specialist repair services.

Main Technical Specifications

14” Colour CRT Monitor – OKUMA CDT14148B

The CDT14148B is a 14-inch colour CRT monitor (“14-inch Colour CRT Display”) manufactured for OKUMA CNC systems, documented as the operator panel display unit for controls in the OSP (Open System Platform) series. The monitor provides the visual interface between the numeric control and the operator, displaying NC programs, machine parameters, diagnostic screens, and alarm messages. It is a colour cathode-ray tube (CRT) monitor with a 14-inch 4:3 screen, designed for integration into the machine tool operator panel.

The operator panel monitor is the primary interface between the operator and the CNC control: without a working display it is impossible to access machining programs, diagnostic functions, or machine parameters. A monitor failure renders the machine completely inoperable, blocking any interaction with the numeric control, including programming, tool offset verification, and safety alarm monitoring.

OKUMA Corporation is one of the world’s largest and most established Japanese CNC machine tool manufacturers, founded in 1898 in Nagoya; it is among the few builders that develop both the machines and their own proprietary CNC controls (OSP – Open System Platform series) in-house. CRT monitors in the CDT14148B family are legacy / discontinued components: the transition away from CRT technology has made new units unavailable; replacement parts are obtainable only as used, NOS, or through conversion to a compatible LCD monitor.

Main Technical Specifications

10-Inch Monochrome CRT Monitor – OKUMA MDT-1005

The MDT-1005 is a 10-inch monochrome CRT display unit (“Monochrome CRT Display Unit”) manufactured by OKUMA, documented as the operator display for the OKUMA OSP 500 CNC control system. The screen constitutes the human-machine interface (HMI) of the CNC panel, showing machining parameters, programming pages, alarm messages, and machine diagnostics. The tube is a monochrome green-phosphor CRT, typical of 1980s–1990s CNC technology. This component was fitted to OKUMA lathes and machining centres equipped with the OSP 500 control.

The CRT monitor is the display unit that makes the CNC operator interface accessible: without it, the operator cannot read programs, machining parameters, tool offsets, or alarm messages. A faulty monitor renders the machine operationally blind — no cycles can be started, no adjustments made, and no faults diagnosed, resulting in an immediate production stoppage.

OKUMA Corporation is a Japanese manufacturer founded in 1898, a world leader in CNC machine tools (lathes, machining centres, grinders) and proprietary control systems. The OSP 500 control belongs to a legacy generation from the 1980s–1990s; the MDT-1005 monitor is legacy / discontinued: available only as used stock, surplus, or through specialist repair.

Main Technical Specifications

Brushless II Servo Drive – OKUMA BLII-D7575A

The BLII-D7575A is an AC brushless servo drive (“AC Brushless Servo Amplifier”) from the BLII (Brushless II) series manufactured by OKUMA Corporation, designed for CNC machining centers, lathes, and milling machines equipped with OKUMA’s proprietary OSP (Open System Platform) control. The module is a digital drive that manages speed and current control loops for AC brushless servo motors on the working axes. The suffix “D7575A” identifies the size variant and revision within the BLII series; versions with different torque/power ratings may exist.

The servo drive is the power electronic stage that energises and regulates the axis servo motor: it converts digital commands from the CNC into precise phase currents, closing the speed and position control loops. A failure of the BLII-D7575A renders the corresponding axis uncontrollable, causing immediate machine stoppage and the risk of dimensional rejects or collisions during the machining operation in progress.

OKUMA Corporation is a Japanese manufacturer founded in 1898 in Oguchi, Aichi, and one of the world’s largest producers of CNC machine tools. OKUMA is one of the few manufacturers in the world to design machine, CNC control (OSP), and servo/spindle drives entirely in-house, ensuring full system integration. The BLII series belongs to a mature generation of the OKUMA product portfolio; all products in this line are legacy / discontinued and available only as used, surplus, or through specialist repair services.

Main Technical Specifications

10″ LED Monitor – OKUMA OSP50X0-LED

The OSP50X0-LED is a 10-inch LED display panel for CNC operator panels (“10″ LED Operator Panel Monitor”) manufactured by OKUMA, designed as a replacement display unit for OKUMA OSP-5000 series CNC controls (OSP-5000L, OSP-5000M, OSP-5020L, OSP-5020M and variants). The display uses LED-backlit LCD technology as a modern drop-in replacement for aging original CRT monitors or fluorescent-backlit (CCFL) panels. The designation OSP50X0-LED indicates cross-compatibility with the full OSP-50x0 control family, where “X” covers the different machine variants (OKUMA lathes, machining centres, and grinding machines).

The operator panel monitor is the sole visual interface between the operator and the CNC system: it displays the active NC program, axis position readouts, tool offsets, machining parameters and all machine diagnostic alarms. Without a functional display the operator cannot read machine status, modify parameters or interpret alarms, making the CNC lathe or machining centre effectively unusable in production.

OKUMA Corporation is a Japanese machine tool manufacturer founded in 1898 in Nagoya, specialised in CNC lathes, vertical and horizontal machining centres, grinding machines and entirely in-house developed control systems. The OSP (Open Systems Platform) control platform is well known for its high reliability and long operational life. Components for the now-dated OSP-5000 series are available as spare parts in limited quantities and may require significant lead times to source.

Main Technical Specifications

Servo Axis Drive – OKUMA VAC III-D3/6

The VAC III-D3/6 is a servo axis drive amplifier (“Servo Drive Amplifier”) from the VAC III series manufactured by OKUMA, documented as a component of OKUMA CNC machining centers and lathes from the 1980s–1990s equipped with the proprietary OSP numerical control. The module manages the current and velocity regulation loops of the servo axis motor, interfacing with the CNC unit via the signal bus and with the motor through the power bus and encoder feedback connectors. The designation D3/6 indicates the nominal/peak current rating of the drive; this is not a CPU or I/O module, but a dedicated drive stage for linear or rotary axes.

The servo axis drive is the electronic module that converts CNC position and velocity commands into power signals for the axis motor: it closes the current and velocity loops, ensuring positioning accuracy and dynamic stability throughout the machining process. A failure in the drive makes the corresponding axis completely unusable, causing an immediate machine stoppage and preventing any cutting operations until the component is replaced or repaired.

OKUMA is one of Japan’s leading CNC machine tool manufacturers, founded in 1898 in Nagoya. The company is renowned for its vertical integration between machine and proprietary numerical control (OSP – Open System Platform), covering milling machines, lathes, machining centers, and high-precision grinding machines. All components in the VAC III series are legacy / discontinued: available only as used stock, surplus, or through specialist repair services.

Main Technical Specifications

AC Axis Servo Drive – OKUMA VAC III D-22

The VAC III D-22 is an AC axis servo drive (“AC Axis Servo Drive”) manufactured by OKUMA Corporation, belonging to the VAC III series (Vector AC Control, third generation). The unit is documented on OKUMA CNC machining centres and lathes equipped with the OSP (Open System Platform) control, including the MB, MA, MC and LB, LT series. The module performs PWM vector control of the AC axis servo motor, receiving position and speed references from the CNC via proprietary digital bus or fibre optic link, and driving the IGBT power stage to the axis motor. The suffix D-22 identifies the specific size within the series (nominal current or power class).

The axis servo drive is the critical component of the machine motion system: it receives the position profile from the CNC, closes the position and speed loops on the motor, and guarantees the precision, dynamics, and repeatability of each axis during machining. A failure of this module causes complete loss of control of the corresponding axis, immediately stopping the machine and making any machining cycle impossible until the unit is replaced or repaired.

OKUMA Corporation is a Japanese CNC machine tool manufacturer founded in 1898, headquartered in Nagoya. It is one of the few manufacturers in the world to develop in-house both the machines and the CNC controls (OSP – Open System Platform) and drive systems, ensuring full vertical integration and optimised compatibility across all system levels. Products in the VAC III series are legacy / discontinued: available exclusively as used, surplus, or through specialist repair centres.

Main Technical Specifications

Servo Drive Card – OKUMA VAC III D-11

The VAC III D-11 is a servo drive card (“Velocity Amplifier Card”) manufactured by OKUMA, a component of the axis drive system for CNC machine tools equipped with an OSP (Open System Platform) controller. The card belongs to the third generation of the VAC (Velocity Amplifier Card) series; the D-11 designation identifies the specific power and regulation topology variant. It interfaces the CNC controller with the servo motor power stage, processing the analogue velocity reference and the feedback signal from the resolver or encoder.

The VAC III D-11 is the electronic controller that closes the velocity loop on the axis servo motor: it receives the position/velocity reference from the CNC unit and generates the command signal for the power stage, ensuring precise axis positioning during machining. A failure of this component results in the immediate loss of the affected axis, causing machine downtime and complete inability to resume production until the component is repaired or replaced.

OKUMA is a Japanese machine tool manufacturer founded in 1898 in Oguchi (Aichi, Japan). It is one of the few manufacturers worldwide to produce both machine tools and its own CNC control system (OSP – Open System Platform), ensuring full integration between mechanics and control electronics. Products from the VAC III series are legacy / discontinued: available exclusively as used, surplus, or through specialist repair services.

Main Technical Specifications

Servo Axis Drive – OKUMA VACII D-11A

The VACII D-11A is a servo axis drive (“Servo Velocity Amplifier Drive”) manufactured by OKUMA Corporation, belonging to the VACII (Velocity Amplifier Control II) series. It is documented as a component of OKUMA CNC machining centres and lathes equipped with the OSP-5000 and OSP-7000 control systems. The unit manages the velocity loop of the DC axis servo motor, receiving the speed reference from the OKUMA controller and driving the power stage of the drive. The component may exist in construction variants related to the firmware revision of the corresponding OSP control.

The servo axis drive is the electronic controller that closes the velocity loop on the axis motor: it receives the speed reference from the CNC and drives the motor maintaining the required position and speed during machining. A failure in this unit causes immediate loss of control of the corresponding axis, with a CNC alarm and machine stop; as a proprietary OKUMA component, replacement requires an identical unit or specialist repair on OKUMA hardware.

OKUMA Corporation, founded in 1898 in Nagoya, Japan, is one of the world’s leading manufacturers of CNC machine tools and proprietary control systems (the OSP – Okuma Servo Pack series). OKUMA develops both machines and controllers in-house, ensuring tight hardware/software integration. Components of the VACII series are legacy / discontinued: available only as used, surplus, or through specialist repair.

Main Technical Specifications

AC Axis Servo Drive – OKUMA VAC-D-8A

The VAC-D-8A (internal code VACD8A) is an AC axis servo drive manufactured by OKUMA, a Japanese builder of CNC machine tools and proprietary CNC control systems. The unit belongs to the VAC-D series of AC servo drives integrated in the control cabinets of OKUMA machines equipped with the OSP (Open System Platform) CNC controller. The “8A” designation indicates the drive’s rated output current, typically 8 A continuous. The device receives position and speed references from the CNC and drives the corresponding axis servo motor by closing the regulation loops.

The servo drive is the core of an axis drive circuit: it converts the CNC’s digital commands into power signals for the servo motor, simultaneously managing the position, speed, and current control loops. A failure of the VAC-D-8A results in the complete loss of the controlled axis, an immediate machine halt, and a drive alarm; prompt replacement or repair is essential to restore production.

OKUMA is a Japanese company founded in 1898, one of the world’s leading manufacturers of CNC lathes, machining centres, and closed-loop CNC control systems. Unlike many competitors, OKUMA designs and manufactures both the machines and the CNC control (OSP) in-house, ensuring unique vertical integration in the industry. Products in the VAC-D series are legacy / discontinued and available exclusively as used, surplus, or through specialist repair.

Main Technical Specifications

AC Spindle Drive – OKUMA VAC D-22

The VAC D-22 is an AC spindle drive unit manufactured by OKUMA Corporation, designed for vector control of the spindle motor in OKUMA CNC machine tools. The unit belongs to the VAC (Variable AC Drive) series, typically employed on machining centers and CNC lathes equipped with the OSP (Open System Platform) CNC control. It manages torque, speed and current of the spindle motor, receiving references directly from the CNC via the proprietary OKUMA bus. The component is installed either as a standalone rack unit or as an integrated module within the machine’s electrical cabinet.

The spindle drive is the core of the spindle control system: it converts three-phase mains voltage into a variable-frequency, variable-voltage output applied to the spindle motor, maintaining stable rotational speed regardless of load variations during machining. A failure in this module causes immediate and uncontrolled spindle stop, rendering the machine completely inoperable: without the drive, no cutting operation can be performed, resulting in immediate production downtime.

OKUMA Corporation is a Japanese manufacturer founded in 1898 in Nagoya, Japan, and one of the world’s leading producers of CNC machine tools (lathes, machining centers, grinding machines) and related OSP series CNC controls. OKUMA designs both the machines and the drives and motors in-house, ensuring full hardware and software system integration. Products in the VAC series are legacy / discontinued: available only as used, NOS (surplus), or through specialist repair services.

Main Technical Specifications

AC Drive Unit – OKUMA VAC D-11

The VAC D-11 is an AC drive unit (“AC Drive Unit”) manufactured by OKUMA, documented as a component of OKUMA CNC systems equipped with the OSP (OKUMA Servo Pack) control. The drive handles speed and torque regulation of AC motors, covering both linear axes and the spindle, and interfaces directly with the numeric control via a proprietary bus. The designation VAC refers to “Vector AC” control technology, adopted by OKUMA for its machine series from the 1980s–1990s.

The VAC drive unit is the power and regulation node that converts the CNC’s digital references into voltage and current for the machine’s AC motors: without it, the controlled axis or spindle receives no regulated power and the machine halts immediately on alarm. A drive failure typically results in position loss, dimensional rejects, or an abrupt machining cycle stop with collision risk.

OKUMA Corporation, founded in Japan in 1898, is one of the world’s leading CNC machine tool manufacturers (lathes, machining centres, grinders) and develops its own machines, CNC controls (OSP series) and drives in-house, ensuring full hardware/software integration. Products from the legacy VAC series are legacy / discontinued: available only as used, NOS surplus, or through specialist repair.

Main Technical Specifications

CNC Control Power Supply Module – OKUMA OPUS 5000 RLP

The OPUS 5000 RLP is a regulated logic power supply module for CNC control (“Regulated Logic Power Supply Module”) manufactured by OKUMA, a component of the OPUS 5000 CNC control system fitted to OKUMA machining centres and CNC lathes produced during the 1980s and 1990s. The module generates and distributes the stabilised DC voltages required to power the logic boards, processors and interface circuits of the CNC. It is classified as a power unit internal to the control rack, distinct from axis or spindle drives.

The power supply is the energy core of the numerical control unit: it continuously and reliably delivers working voltages to all CNC logic modules. A fault in the power supply causes an immediate shutdown of the entire machine, as without the correct supply voltages no control board can operate; typical symptoms include axis position loss, undiagnosable alarms and inability to start the machining cycle.

OKUMA Corporation is one of Japan’s leading CNC machine tool manufacturers, founded in 1898 in Nagoya. It designs and builds both the machines and its own numerical controls (the OPUS series, succeeded by the OSP – Open System Platform), ensuring full vertical integration. The OPUS 5000 series is legacy / discontinued: spare parts are available only as used stock, NOS surplus, or through specialist repair services.

Main Technical Specifications

CNC Power Supply Unit – OKUMA OPUS 5000 GLP

The OPUS 5000 GLP is an electronic power supply unit for CNC control (“CNC Power Supply Unit”) manufactured by OKUMA, a component of the OPUS 5000 control cabinet. It provides the regulated DC voltages required for the operation of all electronic modules in the control system: logic boards, I/O interfaces, interpolation cards and memory units. The designation GLP identifies the specific configuration of this power supply within the OPUS 5000 family. The OPUS 5000 system was installed on a wide range of OKUMA vertical and horizontal machining centres and CNC lathes from the 1980s and 1990s.

The power supply is the component that converts mains voltage into stabilised and filtered DC voltages, essential for the correct operation of all machine control electronics. A power supply failure causes an immediate and complete shutdown of the CNC control: the machine is rendered unusable until the module is replaced or repaired, resulting in unplanned production downtime and the inability to execute any machining cycle.

OKUMA is a Japanese manufacturer founded in 1898, one of the world’s leading producers of CNC machine tools and proprietary control systems. The OPUS 5000 series represents one of the first open control platforms developed by OKUMA, now fully replaced by the next-generation OSP-P and OSP-P300 systems. All products in the OPUS 5000 family are legacy / discontinued: available exclusively as used, surplus or through specialist repair.

Main Technical Specifications

CNC Control Power Supply Unit – OKUMA OPUS 5000 GHP

The OPUS 5000 GHP is an electronic power supply unit for CNC control (“CNC Control Power Supply Unit”) manufactured by OKUMA, designed as a component of the OPUS 5000 CNC control unit installed on OKUMA machining centres and CNC lathes from the 1980s and 1990s. It converts and regulates the AC mains voltage into the stabilised DC voltages required by the control boards, servo amplifiers, and I/O modules of the system. The suffix GHP identifies the specific variant of this power supply within the OPUS 5000 family.

The power supply is the heart of the CNC control unit’s electrical system: it provides regulated, stable voltages to all active components of the numerical control, from CPU logic to I/O outputs and axis amplifiers. A fault or degradation of its output voltages causes unpredictable CNC behaviour (axis alarms, cyclic CPU resets, parameter loss), immobilising the machine until the unit is replaced or repaired.

OKUMA was founded in 1898 in Nagoya, Japan, and is one of the world’s leading manufacturers of CNC machine tools (lathes, machining centres, grinding machines) and their proprietary control systems. The OPUS series (OPUS 3000, OPUS 5000, OPUS 7000) represents the CNC control generation of the 1980s–1990s, superseded by the open OSP (Open System Platform) still in production today. All products in this family are legacy / discontinued: available only as used, NOS/surplus, or through specialist repair.

Main Technical Specifications

CNC Power Supply – OKUMA MPS 30

The MPS 30 is a switching power supply for CNC control systems (“CNC Power Supply Module”) manufactured by OKUMA Corporation, a Japanese builder of machine tools and CNC control systems. The unit is designed to provide the regulated DC supply voltages required by the logic boards, digital drives, and I/O modules of OKUMA OSP CNC controllers (series OSP700, OSP5000, OSP-U and related). It converts the AC mains input into multiple stabilised and filtered DC outputs. The component is identified interchangeably as MPS30 or MPS 30.

The power supply is the energy backbone of the CNC system: without clean, regulated DC power, the logic boards, communication bus, and servo drives cannot operate reliably. A power supply failure causes an immediate total machine shutdown; excessive ripple on the DC rails can trigger random alarms, positioning errors, or premature degradation of the dependent electronic boards.

OKUMA Corporation was founded in 1898 in Nagoya, Japan, and is one of the world’s leading CNC machine tool manufacturers, designing both the machines (lathes, machining centres, grinding machines) and their own OSP (Open System Platform) CNC control series. The MPS 30 belongs to the power supply family for legacy OSP controls: the product is discontinued and available exclusively as used/NOS surplus or through specialist repair services.

Main Technical Specifications

CNC Power Supply Module – OKUMA MPR10

The MPR10 is a CNC control power supply module (“CNC Power Supply Module”) manufactured by OKUMA, used in the electrical cabinets of CNC machine tools equipped with proprietary OSP (Open System Platform) control systems. The module converts and regulates the supply voltages required by the control boards, axis and spindle drives, and other electronic subsystems of the CNC. The part number is MPR10.

The power supply module is a fundamental element of the CNC system: it converts mains voltage into regulated, filtered DC voltages distributed to all control boards and electronic subsystems. Without regulated power the control system cannot start up and the machine is completely inoperative; a failure of this module typically manifests as a total loss of communication between the control and drives, or as non-clearable power alarms.

OKUMA Corporation is a Japanese manufacturer founded in 1898 in Nagoya, specialising in CNC machine tools (machining centres, lathes, grinding machines) and its own proprietary OSP (Open System Platform) control systems. The high degree of integration between machine and control makes OKUMA electronic components non-interchangeable with those of other manufacturers; products of this generation are legacy / discontinued and available only as used, surplus or through specialist repair.

Main Technical Specifications

Spindle Drive Inverter – OKUMA MIV22-3-V1

The MIV22-3-V1 is a spindle drive inverter (“Motor InVerter / Spindle Drive”) manufactured by OKUMA, documented as a power and control module for the AC spindle motor in OKUMA CNC machining centres and lathes equipped with the proprietary OSP (Open System Platform) control system. The unit manages frequency and voltage conversion to the spindle motor, receiving speed references from the CNC via the OKUMA proprietary bus. Identified by part number MIV22-3-V1 (internal stock code MIV223V1); the prefix MIV stands for “Motor InVerter” in OKUMA nomenclature.

The spindle drive is the electronic converter that transforms the AC mains supply into variable voltage and frequency for the spindle motor, enabling continuous speed regulation as commanded by the CNC program. It is a critical component of the OKUMA drive architecture: failure renders the spindle completely inoperative, causing immediate machine downtime and preventing any machining operation from being carried out.

OKUMA Corporation is a Japanese manufacturer founded in 1898 and a world leader in CNC machine tools and proprietary OSP (Open System Platform) control systems. OKUMA designs and manufactures both machines and controls in-house, ensuring full integration between mechanics and electronics. Components in the MIV series are legacy / discontinued: available exclusively as original spare parts from remaining stock or through specialist repair and spare-part channels.

Main Technical Specifications

Axis Servo Drive – OKUMA MIV06A-1-B5

The MIV06A-1-B5 is an axis servo drive amplifier (“Axis Servo Drive Amplifier”) manufactured by OKUMA Corporation, a component of the axis control system in OKUMA CNC machining centres and lathes equipped with OSP (Open System Platform) control. The manufacturer part number is MIV06A-1-B5 (internal reference: MIV06A1B5). The module belongs to the MIV family of OKUMA servo drives and handles the current and velocity control loops for AC brushless servo motors. The designation “06” indicates the nominal current rating (~6 A continuous); “A1B5” identifies the circuit variant and I/O configuration.

The MIV06A-1-B5 servo drive is the module that converts position and velocity commands from the OKUMA CNC (OSP controller) into three-phase current for the axis servo motor: it closes the current loop in real time and ensures the dynamic response required to follow the machining profile with the demanded precision. If it fails, the controlled axis becomes unavailable, the machine raises an alarm and production stops; on multi-axis machining centres, a single failed drive can halt the entire production cell.

OKUMA Corporation is a Japanese manufacturer founded in 1898, one of the world leaders in CNC machine tools (lathes, machining centres, grinding machines) and proprietary control systems (OSP series). Unlike most builders, OKUMA designs and manufactures in-house the machine, the CNC controller, the motors, and the drives, ensuring a fully integrated and optimised system. Products in the MIV series are considered legacy / discontinued in their older versions, but spare parts and repairs are still supported through specialist service networks.

Main Technical Specifications

Axis Servo Drive – OKUMA MIV05A-1-B5

The MIV05A-1-B5 is an AC axis servo drive (“Axis Servo Drive” / “Motor Inverter”) manufactured by OKUMA Corporation, a core component of the OSP (Open System Platform) CNC control system. The drive manages the current and speed regulation loops of the AC servo motor on the machine axis, receiving position commands from the CNC via OKUMA’s proprietary bus and returning position and speed feedback. The commercial part number is MIV05A-1-B5 (internal reference: MIV05A1B5); the “MIV” designation identifies the Motor Inverter family within the OKUMA range.

The axis servo drive is the power and regulation module that converts CNC position and speed commands into current delivered to the AC axis motor: it closes the current and speed feedback loops, ensuring precise positioning and dynamic response during machining. A failure in this component makes the corresponding axis uncontrollable: the machine halts with an alarm and production cannot resume until the drive is replaced or repaired.

OKUMA Corporation is a Japanese manufacturer founded in 1898, one of the world’s leading producers of CNC machine tools; it operates a vertically integrated model, designing in-house both the machines and the OSP controls, drives and motors. Products in the MIV series belong to earlier generations of OSP controls and are considered legacy / discontinued: sourcing is exclusively through used/surplus channels or specialist repair services.

Main Technical Specifications

Axis Servo Drive – OKUMA MIV01A-1-B5

The MIV01A-1-B5 is an axis servo drive module (“Motor Interface V”) manufactured by OKUMA Corporation, belonging to the proprietary MIV servo drive series. It is documented as a power and control unit for axis servo motors in OKUMA CNC machining centres and lathes equipped with the OSP (Open System Platform) control system. The module closes the position, velocity, and current loops, interfacing with the CNC unit via OKUMA’s proprietary bus. The suffix B5 identifies the hardware/firmware revision; the designation 01A indicates the power class (small-axis drive).

The servo drive is the component that translates position and velocity commands generated by the CNC into power currents for the axis servo motor: it simultaneously manages the position loop, the velocity loop, and the current loop, ensuring dimensional accuracy and dynamic response during machining. A servo drive failure renders the axis completely inoperative, triggers an axis alarm on the machine, and halts all machining operations until the module is replaced or repaired.

OKUMA Corporation is a Japanese manufacturer founded in 1898 in Nagoya, one of the few companies in the world to design CNC machine tools, numerical controls (OSP), and servo drives entirely in-house, ensuring full hardware/software integration. The modules in the MIV family belong to older generations of the OSP system and are legacy / discontinued: available only as used, surplus, or through specialist repair services.

Main Technical Specifications

CNC Power Supply Unit – OKUMA E0451-521-094

The E0451-521-094 is a switching power supply for CNC control systems (“CNC Control Power Supply Unit”) manufactured by OKUMA Corporation, designed to supply the electronic boards of the OKUMA OSP (Open System Platform) CNC controller. The unit converts mains voltage into stabilised DC voltages (+5 V, ±12 V / ±15 V, +24 V DC typical) required by the logic boards, I/O modules and axis drives of the control system. The part number E0451-521-094 belongs to the E04 series of OKUMA electronic spare parts, used on machines equipped with OSP-5000, OSP-7000 and later generation controllers.

The power supply is at the heart of the CNC control’s power distribution: without stable, noise-free voltages, the CPU boards, axis drives and I/O modules cannot operate correctly. A power supply failure causes immediate machine shutdown, undervoltage alarms, random controller resets or corrupted memory data — prompt replacement is essential to restore production and prevent secondary damage to the powered boards.

OKUMA Corporation is a Japanese machine tool manufacturer founded in 1898 in Nagoya; it is one of the few manufacturers worldwide to design both machine tools (machining centres, lathes, grinders) and the proprietary CNC controller (OSP – Open System Platform series) entirely in-house. Spare parts in the E04xx series refer to machines of the OSP-5000/7000 generation and later; older components are legacy / discontinued and available only as used, surplus or through specialist repair.

Main Technical Specifications

DC Power Supply Unit – OKUMA DC-S1A

The DC-S1A is a DC power supply unit (“DC Power Supply Unit”) manufactured by OKUMA, designed to supply regulated DC voltages to the electronic boards of OSP (Open System Platform) CNC control systems. The unit converts the AC mains supply into multiple stabilised DC rails required for the operation of CNC logic circuits, axis drives and interface peripherals. Documented on OKUMA machining centres and lathes fitted with OSP controllers of earlier generations; constructive variants may exist depending on the revision of the control system.

The DC power supply is the core of the CNC electrical infrastructure: without stable, filtered DC voltages no control board can operate. A failure of this unit causes the immediate shutdown of the entire control logic, halting the machine and making any machining cycle impossible. The quality of the output voltages directly affects the reliability of the whole system: even minor fluctuations or drops can corrupt parameters, damage downstream boards or generate intermittent alarms that are difficult to diagnose.

OKUMA Corporation (??????) is a Japanese CNC machine tool manufacturer founded in 1898 in Oguchi, Aichi Prefecture. It is one of the very few manufacturers in the world that designs and builds both its machine tools and its own CNC controllers (OSP – Open System Platform) entirely in-house, ensuring full hardware and software integration. Components of the DCS family belong to earlier controller generations that are now legacy / discontinued: available exclusively as used, surplus or through specialist repair.

Main Technical Specifications

DC Power Supply for CNC Control – OKUMA DCPS-2

The DCPS-2 is a DC power supply module (“DC Power Supply”) manufactured by OKUMA, the Japanese CNC machine tool builder. The module is documented as a component of OKUMA’s OSP series (Open System Platform) CNC controls, where it supplies the regulated DC voltages required by the control system’s electronic boards: CPU boards, I/O modules, communication interfaces, and drive logic stages. The alternative part number is listed exclusively in the specifications table.

The DCPS-2 power supply is responsible for converting and regulating the supply voltages for all the electronic components of the CNC control. A failure of this module typically results in a complete machine shutdown, with the control unable to start and widespread alarm conditions across all axes; it is therefore a critical component for the operational availability of the machine tool.

OKUMA Corporation is one of the world’s leading CNC machine tool manufacturers, headquartered in Oguchi, Aichi (Japan), founded in 1898. It is renowned for developing entirely in-house its OSP (Open System Platform) controls, which equip its lathes, vertical and horizontal machining centres, and grinding machines. Components of the DCPS series belong to older control generations and are to be considered legacy / discontinued: availability is limited to the used, surplus, and specialist repair market.

Main Technical Specifications

10″ Monochrome Monitor – OKUMA D10MM-10A

The D10MM-10A is a 10″ industrial monochrome CRT display unit (“10-inch Monochrome CRT Display Unit”) manufactured by OKUMA, documented as the operator display for the OSP 500 (Open System Platform 500) CNC control. The unit renders the operator interface, part programs, alarm messages and machine axis coordinates on a monochrome phosphor cathode-ray tube. It is fitted on OKUMA CNC lathes and machining centres equipped with the OSP 500 control; hardware revisions may differ in connector type or internal display controller firmware version.

The monitor is the primary visual interface between the operator and the OSP 500 CNC control: it displays part programs, machining parameters, alarms and real-time axis positions. A failed display makes machine supervision and command entry impossible, effectively halting production; on controls of this generation, replacement with an identical or compatible unit is typically the only practical solution, as proprietary-format industrial CRTs do not accept generic direct substitutes.

OKUMA Corporation is a Japanese CNC machine tool builder founded in 1898, headquartered in Oguchi, Aichi. A pioneer in the vertical integration of its own OSP (Open System Platform) controls, OKUMA remains fully independent and active with the current OSP-P300 generation. The OSP 500 control and all associated peripheral components — including this monitor — are legacy / discontinued: available only as used/surplus (NOS) or through specialist repair services.

Main Technical Specifications

BL-IV Brushless Servo Drive – OKUMA BLIV-D100A

The BLIV-D100A is a brushless servo drive (“BL-IV Brushless Servo Drive”) manufactured by OKUMA Corporation, belonging to the BL-IV (Brushless Series IV) drive family. It is documented as a component of OKUMA CNC systems — machining centers, lathes and grinding machines — equipped with the proprietary OSP control system. The D100A suffix in the part number indicates a rated output current of 100 A, positioning this module as a high-torque drive for the main spindle or a primary axis. It manages the speed, current and torque regulation loops for OKUMA brushless servo motors and interfaces with the power section of the machine’s electrical cabinet.

The BL-IV drive is the power electronic unit that converts the digital torque and speed references from the OSP CNC controller into controlled currents for the brushless servo motor, maintaining position, speed and torque with the highest precision throughout each machining cycle. A failure in this drive results in complete loss of control over the associated axis or spindle: the machine halts on alarm and cannot resume production until the unit is repaired or replaced.

OKUMA Corporation, founded in 1898 in Nagoya, Japan, is one of the world’s leading manufacturers of CNC machine tools (lathes, machining centers, grinding machines) and is the only manufacturer in the world that designs and produces in-house the complete technology chain: machine, CNC control (OSP), drives and motors. Products in the BL-IV series are legacy / discontinued: available only as used, NOS surplus, or through specialist repair.

Main Technical Specifications

Brushless Servo Drive – OKUMA BLII-D75/50A

The BLII-D75/50A is a brushless servo drive amplifier (“Brushless Servo Drive Amplifier”) belonging to the BLII-D series, manufactured by OKUMA, a Japanese builder of CNC machine tools. The unit is designed to operate within the proprietary OKUMA OSP (Open System Platform) CNC system, controlling brushless servo motors on linear axes or spindles in OKUMA machining centres and CNC lathes. The part designation identifies the nominal current class of the amplifier (50 A continuous output); the module is installed on the internal DC bus inside the machine cabinet and manages the current and speed loops of the associated motor.

The servo drive is the element that converts the motion references issued by the CNC into controlled current for the brushless servo motor, ensuring precise positioning and stable cutting force throughout the machining cycle. A failure of this module causes total loss of control on the affected axis: the CNC detects the fault, halts the automatic cycle and triggers a drive alarm; the machine cannot resume production until the component is replaced or repaired.

OKUMA Corporation, founded in 1898 in Nagoya, Japan, is one of the world’s leading CNC machine tool builders, renowned for its full vertical integration of machine, motor, drive and proprietary OSP numerical control. The BLII-D drive series belongs to a well-established generation no longer actively marketed through original channels: availability is limited to the used/NOS surplus aftermarket and specialist repair services; this component is to be considered legacy / discontinued.

Main Technical Specifications

Brushless Servo Drive – OKUMA BLII-D50A

The BLII-D50A is a brushless servo drive amplifier (“Brushless Servo Drive Amplifier”) manufactured by OKUMA, part of the BL II (Brushless II) family designed for OKUMA CNC systems with OSP control. The D50A designation indicates a continuous output current class of 50 A, sized for controlling linear and/or rotary axis servo motors on OKUMA machining centres and turning centres. The unit interfaces the power stage with the CNC via OKUMA’s proprietary serial bus and acquires encoder feedback from the brushless axis motor.

The brushless servo drive is the power conversion and regulation unit that governs each machine axis motor: it receives position and speed references from the CNC, converts them into precise three-phase current for the brushless motor, and closes the position, speed, and current control loops. A drive failure renders the affected axis completely inoperable, triggers alarms that halt the entire machine, and prevents any machining until the unit is replaced or repaired.

OKUMA Corporation is one of Japan’s leading CNC machine tool manufacturers, founded in 1898 and listed on the Tokyo Stock Exchange (TSE). The company is renowned for its “One Source” philosophy: it independently designs and manufactures CNC controls (OSP series), motors, drives, and machine tools, ensuring full integration between all system components. Products in the BL II family are legacy / discontinued in the current catalogue: available mainly as used, surplus, or through specialist repair.

Main Technical Specifications

BLII Brushless Servo Drive – OKUMA BLII-D30A

The BLII-D30A is a brushless servo drive (“Brushless Servo Drive” / “Servo Amplifier”) manufactured by OKUMA Corporation, belonging to the BLII (Brushless II) series of drives for brushless servo motors. Documented as a component of OKUMA vertical and horizontal machining centres and CNC lathes equipped with the OSP (Open System Platform) numerical control, the BLII-D30A is a power and control unit delivering regulated current to the linear axis servo motors (or to the spindle, depending on configuration), with a peak current in the order of 30 A as derived from the part designation. The unit interfaces directly with the OSP control via a dedicated serial bus and manages the motor current and velocity closed loops.

The BLII servo drive is the core of the CNC axis power chain: it converts the position and speed commands issued by the OSP control into regulated current for the brushless servo motors, guaranteeing the kinematic accuracy of the machine tool. Without this component the controlled axis becomes inoperative, the CNC triggers an axis alarm and machining must be halted immediately, with the risk of collisions or dimensional rejects on the workpiece in progress.

OKUMA Corporation is a Japanese CNC machine tool manufacturer founded in 1898 in Nagoya, Japan, well known for its vertically integrated production philosophy: it designs and manufactures its own CNC controls (the OSP platform), servo drives, servo motors and machine tools in-house. The BLII-series drives belong to a generation of legacy / discontinued products: still widely installed on machines in service, but available exclusively as used units, surplus stock, or through specialist repair centres.

Main Technical Specifications

Brushless Servo Drive – OKUMA BL-D75A

The BL-D75A is a brushless servo drive amplifier (“Brushless Servo Drive Amplifier”) manufactured by OKUMA, designed to control CNC axis servo motors on machining centres, lathes and milling machines equipped with OKUMA’s OSP (OKUMA Servo Protocol) control systems. The module manages the current and speed regulation loops of the associated brushless servo motor, receiving position and speed references from the CNC and driving the motor via PWM modulation. The prefix BL-D identifies OKUMA’s “Brushless Drive” family; the suffix 75A designates the current rating or version of the module within the series.

The BL-D75A servo drive is the electronic module that translates CNC position and speed commands into drive currents for the brushless axis servo motor: it closes the current, speed and position control loops, ensuring the geometric accuracy and dynamic response required during machining. If the unit fails, the controlled axis is locked or in alarm, making any cutting operation impossible; the entire machine is down until the module is replaced or repaired.

OKUMA Corporation is a Japanese CNC machine tool manufacturer founded in 1898 in Nagoya, Japan, and one of the few companies in the world to develop both the machine tools and the CNC control systems (the OSP – OKUMA Servo Protocol series) entirely in-house. This vertical integration provides optimised firmware and advanced proprietary diagnostics, but makes the drive components machine-specific and non-interchangeable with hardware from other manufacturers. Modules in the BL-D series are legacy / discontinued: available only as used, surplus, or through specialist repair.

Main Technical Specifications

Brushless Servo Drive – OKUMA BL-D50A

The BL-D50A is a brushless AC servo drive (“Brushless Servo Drive”) manufactured by OKUMA, a key component of the axis control architecture in OKUMA CNC machining centres and turning centres. The designation “BL” indicates compatibility with brushless AC servo motors, “D” denotes the drive function, and “50A” identifies the rated output current of the unit. The module manages the current, speed and position control loops in tight integration with the proprietary OSP (Open System Platform) CNC controller by OKUMA. Multiple hardware revisions may exist; the unit interfaces with the controller via a proprietary OSP bus and with the motor via dedicated connectors and optical encoder cable.

The servo drive is the electronic power regulator that converts position and speed references from the CNC into control current for the brushless servo motor: it closes the current and speed loops in real time, guaranteeing torque and kinematic precision of the axis. A failure of the BL-D50A immediately stops the axis it serves, triggering a drive alarm and causing complete machine downtime with no possibility of resuming machining until the unit is replaced or repaired by a specialist.

OKUMA Corporation (??????) is a Japanese machine tool builder founded in 1898, headquartered in Oguchi, Aichi, Japan. It is one of the few manufacturers in the world to design and build both the CNC machine tools and the numerical control system (OSP) in-house, ensuring full hardware-software integration. Modules in the BLD series belong to a legacy generation of OKUMA drives: legacy / discontinued, available only as used parts, surplus stock, or through specialised repair services.

Main Technical Specifications

Brushless Servo Drive for Axis Control – OKUMA BL-D15A

The BL-D15A is a brushless servo drive for axis control (“Brushless Servo Drive”) manufactured by OKUMA, a core component of the CNC axis drive system in OKUMA machine tools. The part number identifies a module from the BL-D (Brushless Drive) family rated at approximately 15 A continuous current, revision A. The module interfaces directly with OKUMA’s proprietary OSP (Open System Platform) CNC controller and with OKUMA brushless servo motors of the same brand. Documented on OKUMA vertical and horizontal machining centres and CNC lathes produced from the 1990s through the early 2000s.

The axis servo drive is the power and regulation module that converts position and speed commands from the CNC controller into current for driving the servo motor: it closes the real-time control loop on speed, torque and axis position. If this unit fails, the controlled axis becomes completely inoperative, bringing the machine to an immediate halt and making any automatic machining cycle impossible.

OKUMA is a Japanese CNC machine tool manufacturer founded in 1898, renowned for its vertically integrated production: it designs in-house the machines, numerical controllers (OSP series), servo motors and drives. The BL-D family drives are proprietary components, non-interchangeable with other manufacturers’ products; versions from the 1990s–2000s are legacy / discontinued and available only as used spare parts or through specialist repair centres.

Main Technical Specifications

AC Servo Drive – OKUMA BDU-15A

The BDU-15A is an AC servo drive unit (“AC Servo Drive Unit”) manufactured by OKUMA, belonging to the BDU (Brushless Drive Unit) series of integrated CNC axis drives. It is documented as a component of OKUMA CNC machining centres and turning centres equipped with the proprietary OSP (Open System Platform) control. The number 15 in the part number denotes the rated output current (15 A); the letter A identifies the construction variant. The unit manages the current and velocity loops of the servo axis motor, receiving position and velocity references from the CNC CPU via the proprietary OKUMA bus.

The BDU-15A is the electronic controller that converts trajectory commands from the CNC CPU into phase currents for the servo motor, closing the current and velocity loops in real time and ensuring rapid, precise axis positioning throughout machining cycles. If it fails, the controlled axis loses all movement capability: the machine triggers an alarm and stops immediately, making any productive operation impossible.

OKUMA Corporation is one of the world’s leading CNC machine tool manufacturers, founded in 1898 in Nagoya, Japan. It is the only manufacturer in the world that designs and produces machines, CNC controls (OSP), drives, and motors entirely in-house: a fully integrated, proprietary ecosystem. Components in the BDU series are legacy / discontinued: available only as used, surplus, or through specialist repair.

Main Technical Specifications

Servo Axis Drive Amplifier – OKUMA BLII-D100A

The BLII-D100A is a digital CNC axis servo drive amplifier (“Digital Axis Servo Drive Amplifier”) from the BL-II series, manufactured by OKUMA. The unit belongs to the second-generation brushless drive family developed by OKUMA for its proprietary OSP (Open System Platform) numerical control systems, and is documented on OKUMA CNC machining centres and lathes of the MA, MC, LB series and related models. It performs digital speed and torque regulation of the servo motor on the controlled axis, interfacing with the OSP proprietary bus and the motor encoder. The D100A suffix in the nomenclature identifies the current rating and variant within the series.

The axis servo drive amplifier is the electronic unit that converts CNC motion commands into power signals for the servo motor: it closes the speed and torque loop on each axis (X, Y, Z or rotary), enabling fast and geometrically precise positioning. Failure of the BLII-D100A renders the corresponding axis completely inoperative: the machine enters a safety fault state and cannot resume machining until the drive is replaced or repaired.

OKUMA is one of Japan’s leading CNC machine tool manufacturers, founded in 1898 in Nagoya. It designs and produces in-house both the machine tools and the CNC controllers (OSP series) as well as the motors and drives, ensuring full vertical system integration. Products in the BL-II series are legacy / discontinued in their original form: availability is limited to used parts, surplus stock, and specialist repair services.

Main Technical Specifications

Spindle Motor Inverter Drive – OKUMA MIV0404-1-B1

The MIV0404-1-B1 is a spindle motor inverter drive module (“Motor Inverter Unit”) manufactured by OKUMA, a component of the OKUMA OSP (Open System Platform) CNC control system. The module handles power conversion and spindle motor speed loop regulation, receiving digital references from the OSP control unit and generating PWM output to the motor. Available in hardware revision B1. Documented on OKUMA vertical and horizontal machining centres and CNC lathes equipped with the OSP platform.

The spindle motor inverter drive is the electronic power converter that translates the CNC speed reference into voltage and frequency at the spindle motor output: through PWM modulation it maintains the programmed speed even under varying cutting loads. A failure of this module renders the spindle completely uncontrollable, halting all machining operations and forcing an immediate machine stop.

OKUMA Corporation is a Japanese precision machine tool manufacturer headquartered in Nagoya, founded in 1898. OKUMA designs and produces both the machine tools and their own CNC systems (the OSP platform), ensuring complete vertical integration between control and drives. The MIV-series drive components are proprietary to the OKUMA system and are not interchangeable with drives from other manufacturers. This product is legacy / discontinued: available only as used, surplus or through specialist repair.

Main Technical Specifications

14” LED LCD Monitor for CNC – OKUMA CDT14-LED

The CDT14-LED is a 14-inch LED-backlit flat-panel LCD monitor (“14-inch LED LCD Flat Panel Monitor”) manufactured by OKUMA, designed for installation on OKUMA CNC machining centres and turning centres equipped with the proprietary OSP (Open System Platform) numerical control. The unit is a direct replacement for the older cathode-ray tube (CRT) displays fitted to the same machines, maintaining mechanical and electrical compatibility with the original operator panel. It is available with standard VGA video input and industrial power supply; some variants support composite video input. The alternative part number is listed in the table below.

The monitor is the primary visual interface between the operator and the CNC controller: it displays machining programmes, machine parameters, active alarms, axis positions and cycle status. A faulty display or a degraded backlight makes it impossible to read process information, forcing an immediate machine stoppage; rapid replacement with a compatible unit is often the only alternative to extended downtime.

OKUMA Corporation is a Japanese machine tool manufacturer founded in 1898, one of the world’s leading producers of CNC lathes, vertical and horizontal machining centres and integrated manufacturing systems. OKUMA is one of the very few companies in the sector to develop both its machine tools and its own proprietary CNC controller (OSP) in-house, ensuring complete hardware and software integration. Display spare parts for machines with older-generation OSP controls are legacy / no longer in current catalogue and are available primarily as surplus, used, or through suppliers specialising in display retrofit and conversion.

Main Technical Specifications

Servo Drive Module – OKUMA MIP22 D-22

The MIP22 D-22 is a servo drive module (“Servo Drive Module”) manufactured by OKUMA, a leading Japanese CNC machine tool builder. The component belongs to OKUMA’s proprietary drive family, designed to integrate with the OSP (Open System Platform) CNC control series. It manages the current and speed regulation loops for servo axes, interfacing directly with the CNC controller and the machine’s AC brushless servo motors. The “D-22” suffix identifies the specific power/current variant within the MIP22 series.

The servo drive module is the core element of the axis motion system: it receives position and speed commands from the CNC, supplies the motors with the required current, and closes the position loop in real time. If it fails, the controlled axis becomes inoperative, making any machining impossible and causing an immediate machine stop with a system alarm. Replacement requires a module compatible with the specific OSP version installed on the machine.

OKUMA Corporation is one of Japan’s longest-established machine tool companies, founded in 1898 in Nagoya. Unlike many competitors, OKUMA designs and manufactures its own CNCs, motors, and drives in-house, ensuring complete hardware-software integration. Components from historical series are legacy / discontinued: availability is limited to the used market and specialist repair services.

Main Technical Specifications

Spindle Inverter Drive – OKUMA MIV22-3-V3

The MIV22-3-V3 (main part number MIV223V3) is an electronic spindle inverter drive (“Spindle Inverter Drive”) manufactured by OKUMA, belonging to the MIV series of power modules integrated in OKUMA CNC machining centres and lathes equipped with the OSP (Open System Platform) numerical control. The module handles the conversion of the DC bus voltage into variable-frequency, variable-voltage three-phase power for the spindle motor, operating within the machine’s drive cabinet. The V3 designation indicates the third revision of the MIV22-3 variant, potentially incorporating hardware updates over earlier versions.

The spindle inverter drive is the power electronics module that converts DC bus voltage into variable-frequency and variable-voltage three-phase power for the spindle motor. It receives speed and torque references from the OSP control and maintains stable, precise spindle rotation at any programmed speed and cutting load. Failure of this unit completely disables the spindle, preventing the machine from performing any machining operation.

OKUMA is a Japanese CNC machine tool manufacturer founded in 1898, headquartered in Oguchi, Aichi. Unlike most machine tool builders, OKUMA designs and manufactures its own CNC controls (the OSP series), motors, and drives in-house, resulting in a highly integrated and proprietary system. MIV series components are machine-specific and generally not cross-compatible with other brands; older variants are legacy / discontinued and available only as used stock or through specialist repair services.

Main Technical Specifications

CNC Power Supply Unit – OKUMA OPUS 5000 RHP

The OPUS 5000 RHP is an electronic power supply module for CNC control (“CNC Control Power Supply Unit”) manufactured by OKUMA, designed for the proprietary numerical control system OKUMA OPUS 5000. The unit provides the regulated DC voltages required for all electronic boards within the control: logic boards, interface boards and axis control modules. It interfaces with the CNC main control board and axis drive modules via dedicated internal connectors.

The power supply is the fundamental component of the CNC control: without stable and regulated voltages the entire control system cannot operate. A failure of this unit causes immediate machine stoppage and renders the complete control non-functional until the module is repaired or replaced. The quality of voltage regulation directly affects axis stability and machining accuracy.

OKUMA is a Japanese manufacturer founded in 1898 in Oguchi (Aichi Prefecture), specialising in CNC machine tools and proprietary control systems (OSP series). The OPUS 5000 control belongs to the 1980s–1990s generation, now legacy / discontinued, superseded by the OSP-P series: spare parts are available only as used, surplus or through specialist repair.

Main Technical Specifications

5.7″ CNC LCD Monitor – ORION OGM-128GS24Y-1-F5025

The OGM-128GS24Y-1-F5025 is an industrial 5.7″ LCD monitor (“Industrial LCD Monitor”) manufactured by ORION, designed for installation on CNC machine tool operator panels and industrial automation systems. The model code indicates a 24 V DC supply voltage and a greyscale LCD panel; the “F5025” suffix identifies the front panel mechanical format. The display is engineered as a direct “drop-in replacement” for obsolete CRT monitors fitted to numerical control systems from the 1980s and 1990s, preserving the original mounting footprint and video connector.

The operator panel monitor is the primary visual interface between the operator and the numerical control: it displays NC programs, alarm messages, tool offset data, and machine status in real time. A failed or degraded display makes programming and machining monitoring impossible, forcing a machine shutdown; LCD technology eliminates the typical CRT failure modes (thermal drift, degaussing, high internal voltage) and delivers a significantly longer service life.

ORION is a specialist manufacturer of displays and monitors for industrial and CNC applications, known for producing LCD replacement panels compatible with the main numerical control systems (Fanuc, Siemens, Mitsubishi, Heidenhain and others). Products are designed for harsh environments with a wide operating temperature range and resistance to mechanical vibration. This model belongs to a legacy line: availability as new is limited to remaining stock/surplus.

Main Technical Specifications

AC Brushless Servo Motor – PANASONIC MSMA082A1C

The MSMA082A1C is an AC brushless servo motor rated at 750 W, belonging to the MINAS A series by Panasonic Industrial Devices. The part number decodes as: MSMA family (high-inertia motors, 80 mm frame), 750 W, 200 V AC supply, integrated incremental encoder at 2,500 pulses/rev, and standard mechanical configuration with keyed shaft (suffix “A1C”). It is compatible with Panasonic MSDA and MSD series drives (MINAS A) and is documented on machining centres, CNC milling machines and axis drive systems from various machine-tool builders.

The servo motor is the electromechanical actuator that converts the CNC position or speed reference into real axis movement: it delivers precise, responsive torque thanks to continuous real-time feedback from its built-in encoder. If it fails — due to a winding fault, damaged encoder or worn bearings — the affected axis loses control, the CNC raises a following-error alarm and production stops immediately.

Panasonic Industrial Devices & Solutions (formerly Matsushita Electric Industrial, renamed Panasonic Corporation in 2008) has produced the MINAS servo line since 1991. Current series MINAS A5 and A6 use high-resolution serial encoders (17 bit, 131,072 p/r); the MINAS A (MSMA) series with 2,500 p/r incremental encoder is therefore legacy / discontinued, still widespread in the installed base but available only as used stock, surplus or through specialist repair.

Main Technical Specifications

AC Servo Amplifier – PANASONIC MSDA083A1A

The MSDA083A1A is an AC servo amplifier (“AC Servo Amplifier”) from the MINAS A series, manufactured by Panasonic (Industrial Automation Division, formerly Matsushita Electric Works). It is designed for precise control of AC brushless motors in the MSM082 Panasonic family and is rated in size 083, compatible with ~750 W motors. The power supply is single-phase 100 V AC, 50/60 Hz (suffix A1); control is achieved via analogue ±10 V reference or pulse train (Pulse/Dir or CW/CCW). Feedback is handled by an incremental encoder mounted on the motor. The drive is documented in applications on CNC machine tools, industrial robots, and process automation equipment.

The servo amplifier is the power and regulation module that converts the position or velocity reference from the CNC into PWM-modulated three-phase current for the brushless motor: it closes the current, speed, and position loops in real time, ensuring precise and stable dynamic response. In the event of failure, the axis or function driven by this unit loses all control, causing immediate machine stoppage and preventing any resumption of the machining process until the unit is replaced or repaired.

Panasonic (formerly Matsushita Electric Works) is one of the world’s leading manufacturers of AC servo systems, with the MINAS product line available since the 1990s. The MINAS A series has been progressively superseded by the MINAS A5 and subsequently A6 series; products in the original MSDA family are therefore legacy / discontinued, available only as used, NOS (New Old Stock), or through specialist repair services.

Main Technical Specifications

AC Servo Drive – PANASONIC MSD3A3P1EB

The MSD3A3P1EB is an AC servo amplifier (“AC Servo Drive”) manufactured by Panasonic (formerly Matsushita Electric), belonging to the MINAS series. Designed for closed-loop control of AC permanent-magnet synchronous servo motors, it targets CNC and industrial automation applications. The part number identifies a single-phase variant with an rated current of ~3 A, suitable for motors in the 200–400 W power range. It is neither a PLC nor a standalone CNC controller, but a dedicated amplifier managing the servo motor regulation loops. The EB suffix denotes a variant intended for the European/international market.

The AC servo drive closes the current, speed, and position loops on the servo motor: it receives positioning references from the CNC and generates the current required for the motor to reach and hold the programmed position with maximum precision. A drive failure completely disables the controlled axis; the absence of feedback or motor power triggers an immediate alarm and machine stop, making any machining operation impossible until the unit is replaced or repaired.

Panasonic (formerly Matsushita Electric Works) is one of the world’s leading manufacturers of industrial motion control systems. The MINAS family of AC servo amplifiers and motors has been a mainstay of industrial automation for over thirty years, evolving from the MSD series through to the current MINAS A6/A6N. All MSD-series models are legacy / discontinued: available only as used stock, NOS, or through specialist repair services.

Main Technical Specifications

AC Servo Drive – PANASONIC MSD011P1EC03

The MSD011P1EC03 is a 100 W single-phase AC servo drive (“AC Servo Drive”) manufactured by Panasonic, belonging to the MINAS family. The part number identifies a drive with single-phase AC input, EC-type encoder interface, and revision 03. Designed for the control of AC brushless servo motors, it is documented on CNC machining centres, CNC turning centres, and multi-axis industrial automation systems.

The AC servo drive is the power and control unit that receives position, speed, or torque references from the CNC controller and drives the servo motor with high precision through a sinusoidal PWM regulation loop. In the event of failure, the corresponding machine axis loses motion control: CNC program execution is interrupted and the machine stops in alarm, making any operation on the affected axis impossible.

Panasonic Corporation (formerly Matsushita Electric Industrial Co., Ltd.), founded in 1918 in Osaka, Japan, is one of the world’s leading manufacturers of industrial and consumer electronics. The Factory Automation division produces the MINAS series of servo drives and servo motors, currently in its A6 generation. Products in the MSD series belong to earlier generations and are to be considered legacy / discontinued, superseded by the A4, A5, and A6 families.

Main Technical Specifications

CNC Axis Servo Drive – PANASONIC DV88010LDM04

The DV88010LDM04 is an AC servo drive / servo amplifier for CNC axis control manufactured by Panasonic, belonging to the servo drive range for CNC machine tools. The unit manages closed-loop speed, position, and torque control of the axis servo motor, receiving references from the numerical control and driving the AC power stage accordingly. The prefix DV identifies the drive family within Panasonic’s nomenclature; the numeric and alphanumeric suffixes indicate variants of rated power, supply voltage, and encoder feedback type.

The servo drive is the core of the axis control system: it receives position or speed commands from the CNC, regulates motor current in real time, and guarantees accuracy and repeatability in machine axis movements. A drive failure causes immediate shutdown of the controlled axis, resulting in a machine halt; in multi-axis systems, a single failed drive prevents any machining cycle from running.

Panasonic is one of the world’s leading manufacturers of industrial motion control systems through its Panasonic Industry division (formerly Panasonic Electric Works). The MINAS servo range and earlier series are widely deployed in machine tools, robotics, and industrial automation. Models in the DV88 series belong to an older generation: official technical support availability should be verified, as several codes in this family are legacy / discontinued.

Main Technical Specifications

15” Industrial LCD Monitor – PANEL INDUSTRIAL PC EVD115

The EVD115 is a 15-inch industrial LCD monitor (“15-inch Industrial Panel Monitor”) manufactured by Panel Industrial PC, designed for integration into CNC machine tool control panels, industrial automation systems, and operator panel retrofits. The display uses TFT LCD technology with a typical resolution of XGA (1024×768 pixels), ensuring excellent readability of process parameters even in industrial environments subject to vibration, dust, and variable temperatures. It supports analogue VGA video input (D-Sub 15 pin) and is designed for flush panel mounting with high front-panel protection. Some variants include a resistive touch panel and additional digital video inputs.

The industrial monitor is the primary human-machine interface (HMI) for the CNC operator: it displays axis coordinates, part programs, machining parameters, alarm messages, and CNC diagnostic data in real time. Without a functioning display the operator cannot interact with the CNC, verify dimensional values, or respond to alarms in time; the machine is effectively inoperable until the monitor is replaced or repaired.

Panel Industrial PC is a manufacturer specialising in ruggedised hardware for industrial environments, offering a range that includes flat panel monitors, integrated panel PCs, and HMI solutions for factory automation and CNC control. Products in this line are engineered for the extended lifecycles typical of the manufacturing industry; availability of older models should be verified directly with the manufacturer or through specialist CNC spare parts distributors.

Main Technical Specifications

12″ Monochrome CRT Monitor – PHILIPS 3119 208 89859

The 3119 208 89859 is a 12-inch industrial monochrome CRT monitor (“12-inch Monochrome CRT Monitor”) manufactured by Philips, part of the industrial display series used as the operator interface in CNC systems of the 1980s and 1990s. The cathode ray tube features green phosphor (P31), with composite video or analogue TTL input via BNC or D-Sub connector. Compatible with a wide range of CNC controls and industrial systems requiring a standard video signal with progressive or interlaced scanning.

The monitor is the primary visual interface of the CNC control: it displays part programs, status messages, alarms, axis positions and machine data in real time. In case of failure, the operator has no visibility of CNC parameters, making it impossible to start machining cycles, perform diagnostics or any manual setup; the machine is effectively inoperable until the display is replaced or repaired.

Philips is a Dutch multinational founded in 1891, historically active in the production of industrial displays, CRT monitors and visualisation systems for automation and CNC. The Philips industrial display division supplied monitors to major CNC manufacturers including Siemens, NUM, Heidenhain and Bosch. Monochrome CRT monitors of this generation are legacy / discontinued: no longer manufactured or supported by the OEM, available only as used, NOS surplus or through specialist repair.

Main Technical Specifications

6” LED Industrial Monitor – POLTECH EW50367NCW

The EW50367NCW is a 6-inch LED flat industrial monitor (“6-inch LED Industrial Monitor”) manufactured by POLTECH, designed as an operator interface display for CNC machine tools. The LED-backlit LCD panel is intended to replace legacy CRT monitors in CNC control systems for retrofit and refurbishment applications. Compatible with major CNC systems via a standard video input (VGA or equivalent), it is built to withstand the harsh conditions typical of a workshop environment: vibrations, electromagnetic interference, and dust. The model may be paired with dedicated mounting brackets and cables not included in the basic supply.

The industrial CNC monitor is the primary visual interface between the operator and the numerical control: it displays the running program, axis coordinates, alarm messages, and configuration menus. Without a working display it is impossible to interact with the CNC, enter or modify programs, or diagnose faults; the machine becomes unusable even if all other electronic boards are in perfect working order.

POLTECH is a manufacturer specialised in industrial monitors and displays for machine tools, robotics, and automation, with products designed for harsh environments (IP-rated protection, extended temperature range, DC power supply). The EW50367 series models are compact panels aimed at CNC system retrofitting and are already classifiable as legacy products relative to current wide-format, high-resolution display lines.

Main Technical Specifications

Industrial Switching Power Supply for CNC Control – PROTEK PU40-31SLC

The PU40-31SLC is an industrial switching power supply unit (“Switching Power Supply Unit”) manufactured by PROTEK POWER, part of the PU (Power Unit) product line. The main part number is PU4031SLC; the suffix “31SLC” identifies the output configuration and application profile. The unit is designed to supply logic boards, I/O modules, and peripherals in CNC control systems and industrial automation, providing regulated DC voltages from the AC mains supply. Unlike a simple transformer, it uses a switching topology to ensure high efficiency and active output stabilisation.

The power supply is the energy core of the control system: it converts AC mains voltage into regulated DC voltages essential for the operation of the CPU, I/O boards, display, and CNC drives. A power supply failure causes immediate machine shutdown and may lead to corruption of stored parameters or damage to downstream electronic modules. Out-of-tolerance voltages manifest as persistent alarms, unexpected resets, or failure of the control panel to power on.

PROTEK POWER is a manufacturer specialising in switching power supplies for industrial, CNC, and automation applications. The PU product line is designed for harsh environments, with integrated protections against overcurrent, overvoltage, and short circuit. The older versions of this family are legacy / discontinued and available only as used, surplus, or through specialist repair services.

Main Technical Specifications

Incremental Rotary Encoder – SANYO DENKI RST-4XC-II

The RST-4XC-II is an incremental rotary encoder (“Incremental Rotary Encoder”) manufactured by SANYO DENKI, designed as a position and speed transducer for CNC servo axes and industrial motion control systems. It provides the feedback signal to the servo drive, enabling closed-loop regulation of motor position and speed. The designation RST-4XC-II identifies the second revision of the RST-4XC series; connector variants and exact resolution must be confirmed on the manufacturer’s datasheet.

The encoder is the transducer that closes the position and speed loop in the CNC servo axis: it converts motor shaft rotation into digital pulse trains that the drive and CNC controller use to determine exact position and speed. Without it, the servo motor cannot operate in closed loop; axis control becomes unreliable and any precision machining is impossible.

SANYO DENKI is a Japanese manufacturer founded in 1927, specialising in motion control systems, AC/DC servo motors, rotary encoders, industrial fans, and UPS systems. Its products are widely used in CNC machinery, robotics, and industrial automation worldwide. The RST-4XC family belongs to a mature product line; revision II is legacy / discontinued — available as used, surplus, or through specialist repair.

Main Technical Specifications

AC Servo Drive – SANYO DENKI PY0A015A1G91P01

The PY0A015A1G91P01 is an AC servo amplifier (“AC Servo Amplifier”) from the PY series manufactured by SANYO DENKI. Designed for precision motion control applications in CNC machine tools and industrial automation systems, this drive receives position or speed references from the CNC controller and drives the servo motor in closed-loop torque, speed and position control. The part number PY0A015A1G91P01 identifies a variant of the PY series with a rated output current of approximately 1.5 A; the suffix options (G91, P01) define the encoder feedback configuration and hardware/firmware variant.

The servo drive is the core of axis control: it receives position or speed commands from the CNC, closes the position, speed and current loops, and converts electrical energy into precise motor movement. A drive failure causes the immediate shutdown of the controlled axis, rendering the machine completely inoperable; rapid replacement or specialist repair is essential to minimise production downtime and associated costs.

SANYO DENKI is a Japanese manufacturer founded in 1927, specialising in high-precision motion control systems: servo motors, digital drives, industrial cooling fans, and switching power supplies. The PY series products are widely used in CNC machining centres of Japanese and European origin. Certain variants of this family are legacy / discontinued and available primarily as used stock, NOS (new old stock), or through specialist repair services.

Main Technical Specifications

BL Super Brushless Servo Drive – SANYO DENKI PE0A030MXXXC00

The PE0A030MXXXC00 is a brushless servo drive (“BL Super Servo Amplifier”) manufactured by Sanyo Denki, belonging to the BL Super series of compact, high-performance servo amplifiers. The base field PE0A030M identifies the product family (AC input, nominal power class ~300 W), while the XXX field encodes configurable options — typically encoder feedback type (incremental/absolute) and communication interface — and the suffix C00 denotes the hardware revision. The drive manages the current, speed, and position control loops of a matched brushless (BLDC) motor, receiving the setpoint from the CNC controller via ±10 V analogue input or fieldbus depending on the installed option.

The servo drive is the electronic controller that converts the speed or torque reference from the CNC unit into precise phase current for the brushless motor: without it the controlled axis has no driving force and the machine cannot perform any machining operation. A drive fault typically manifests as an axis alarm, position loss, or uncontrolled motion, resulting in an immediate machine stop and potential damage to the workpiece or tooling.

Sanyo Denki, founded in Japan in 1927, is one of the world’s leading manufacturers of brushless motion control systems, industrial fans, and switching power supplies. The BL Super series is the company’s line of compact, high-performance servo amplifiers designed for CNC and precision industrial automation applications; the product family remains active and supported with full technical documentation and spare parts availability.

Main Technical Specifications

Brushless Servo Drive SUPER – SANYO DENKI PE0A015MXXXC00

The PE0A015MXXXC00 is a brushless servo drive (“Brushless Servo Amplifier”) from the SUPER series manufactured by SANYO DENKI. Designed to drive brushless (BL) motors in high-precision motion control applications, the drive integrates speed and current regulation loops in a compact module. The “015” code identifier indicates a nominal continuous current of approximately 1.5 A (peak typically up to 4.5 A), suitable for light or auxiliary axes on CNC machines and industrial automation systems. The “XXX” suffix indicates that certain options — typically bus version, encoder resolution or supply voltage — were selectable at the time of ordering.

The brushless servo drive closes the current and speed loop on the axis motor: it receives the speed or torque reference from the CNC controller, reads feedback from the motor-mounted encoder, and regulates phase current to follow the programmed path with minimum deviation. In the event of failure the affected axis becomes immobilised or uncontrolled, making it impossible to execute any machining operation involving that axis.

SANYO DENKI is a Japanese manufacturer founded in 1927, specialised in motion control systems (brushless servo motors and drives, industrial fans and precision cooling systems). The SUPER BL series has been widely adopted in CNC machine tools, robotic systems and factory automation. Some versions of this series are legacy / discontinued: availability should be confirmed using the full part number (specific options in place of “XXX”).

Main Technical Specifications

BL SUPER Brushless Servo Drive – Sanyo Denki 65BA030VDT11

The 65BA030VDT11 is a brushless servo amplifier (“Brushless Servo Amplifier”) from the BL SUPER series, manufactured by Sanyo Denki. It belongs to the family of amplifiers dedicated to controlling AC brushless motors in CNC machine tool systems: machining centres, milling machines, lathes and CNC grinding machines. The part number identifies a variant with a nominal output current of approximately 3.0 A (continuous), voltage input type (V), direct terminal block (D) and T-type termination (T11). Compatible with BL SUPER series brushless servo motors from Sanyo Denki.

The brushless servo drive is the electronic controller that closes the current and velocity loops on the brushless motor of the controlled axis: it interprets the reference signal from the CNC and maintains the required torque and kinematic accuracy during machining. If it fails, the axis becomes uncontrollable, the CNC generates an axis alarm and the machine stops immediately, halting all production until the unit is replaced or repaired.

Sanyo Denki Co., Ltd. (????) is a Japanese manufacturer founded in 1927, specialised in motion control systems (brushless servo motors, drives, cooling fans and industrial power supplies). The BL SUPER series is a well-established line designed for machine tools; models from the previous generation (1990s–2000s) are legacy / no longer in active production, available only as used units, new-old-stock, or through specialist repair.

Main Technical Specifications

12″ Monochrome Industrial Monitor – SEIKI NM1231A-11

The NM1231A-11 is a 12″ monochrome industrial CRT monitor (“12 Inch Monochrome Industrial Monitor”) manufactured by SEIKI, a Japanese specialist in industrial displays for numerical control systems and factory automation. It is documented as a display unit integrated into CNC systems from various OEM manufacturers (including Fanuc, Mitsubishi and Mazak). The unit belongs to the NM1231A series; the -11 suffix identifies the specific video input and/or power supply variant. The cathode ray tube uses P31 green phosphor, optimised for readability in workshop environments.

The monitor is the primary visual interface between the operator and the CNC controller: it displays the working screen, ISO/G-code programs, alarm messages and diagnostic screens. Without it the machine is effectively unusable — the operator cannot enter or modify programs, read active alarms, or perform setups and calibrations — causing an immediate production stoppage that cannot be resolved without display replacement or repair.

SEIKI Co., Ltd. is a Japanese manufacturer active since the 1970s producing CRT and LCD industrial displays for machine tools, robotics and factory automation. Its monitors were widely integrated by major CNC OEM builders throughout the 1980s and 1990s. All CRT products in the NM series are legacy / discontinued: no longer manufactured new, and availability is limited to used stock, NOS (New Old Stock), and specialist repair services.

Main Technical Specifications

14″ Colour CRT Monitor – SHARP AIQA8DSP40

The AIQA8DSP40 is a 14-inch colour CRT monitor (“14-Inch Colour CRT Monitor”) manufactured by Sharp Corporation, used as the display unit in CNC machine tool control panels for industrial applications. The display provides the operator with a visual interface for programming, diagnostics and machine status monitoring. Part number AIQA8DSP40 identifies the complete monitor assembly in Sharp’s spare parts nomenclature for industrial applications.

The monitor is the display unit that allows the operator to interact with the CNC system: it shows part programs, machining parameters, alarm messages and status graphics. A failure of the display unit does not necessarily stop an ongoing automatic cycle, but makes programming, alarm diagnostics and parameter setting impossible, rendering the machine effectively unusable under safe operating conditions.

Sharp Corporation is a Japanese company founded in 1912, historically a leader in the production of displays and electronic components for industrial and consumer applications. In 2016 it was acquired by Foxconn (Hon Hai Precision Industry). Industrial CRT monitors of this generation are legacy / discontinued: replacement is only possible through used units, NOS surplus, or via modern LCD retrofit adapters.

Main Technical Specifications